A panel antenna is shaped like a panel, and is usually attached to a mounting bracket, which may then be affixed to the side of a building or inside a building. Additionally, it may be mounted on a swivel mount, which allows the user to position the antenna for optimal concentration of signal strength. Generally, this type of antenna is one-directional, with less movement side-to-side and up and down than an omni-directional antenna, which is an antenna where the position may be fully swiveled and adjusted.
Exquisite appearance
Good defense ability
Impact resistance.waterproofing,anticorrosion,etc.
Optimized dimension
Designed with Broadband technology.
Medium gain
Low VSWR
| Model |
KT-17P |
KT-17P |
| Frequency Range |
824-960(MHz) |
1710-2700(MHz) |
| Input Impedance |
50(Ω) |
|
| VSWR |
<1.5 |
|
| Gain |
15(dBi) |
|
| (3dB)HPBW |
65°H-plane 17°E-plane |
|
| F/B |
>30(dB) |
|
| Isolate |
>28(dB) |
|
| Cross Polarization |
>15(dB) |
|
| Maximum Power |
500(W) |
|
| Polarization |
±45°To The Vertical |
|
| PIM |
<-107(dBm) |
|
| Connector Type |
7/16 or N-K |
|
| Lighting Protection |
Direct Ground |
|
| Ambient temperature |
-40℃— +60℃ |
|
| Mechanical specifications | ||
| Radome Material |
ABS |
|
| Radom Colour |
Ashen |
|
| Wind Velocity |
200(km/h) |
|
| Height/Width/Depth |
1200/280/80(mm) |
|
| Weight |
11(kg) |
|
| Hold Pole Diameter |
Φ50-Φ114(mm) |
|
OEM service offered, we can design the packing box and LOGO mark as your request